氫氧化鉀用途廣泛,性能優良,要想抵達優良運用功效,就要管制好制作品性,今日咱們先來了解一下:氫氧化鉀在生產及加工過程中要避免風險的注意事項。
Potassium hydroxide has a wide range of uses and excellent performance. In order to achieve excellent application effect, it is necessary to control the production quality. Today, let's first understand the precautions to avoid risks in the production and processing of potassium hydroxide.
氫氧化鉀在生產過程中
Potassium hydroxide in the production process
1.遠離火源,熱源和其他工作場所,保證工廠的設置是相對獨立的,并制取時禁止吸煙、明火。
1. Keep away from fire source, heat source and other workplaces, ensure that the factory is relatively independent, and prohibit smoking and open fire during production.
2.使用防爆通風系統和設備,同時可以避免蒸汽泄漏到工作場所的空氣中,因為氫氧化鉀會和水發生反應,還要避免與氧化劑,酸等試劑接觸。
2. Use explosion-proof ventilation system and equipment to avoid steam leakage into the air of the workplace, because potassium hydroxide will react with water and avoid contact with oxidant, acid and other reagents.
3.氫氧化鉀廠家要配備相應種類和數量的消防設備和泄漏應急處理設備,比如各種滅火器、滅火裝置、防漏裝置等。
3. The potassium hydroxide manufacturer shall be equipped with corresponding types and quantities of fire-fighting equipment and leakage emergency treatment equipment, such as various fire extinguishers, fire extinguishing devices, leakage prevention devices, etc.
氫氧化鉀在加工過程中
Potassium hydroxide during processing
1、關注加工純度要求。根據在市場上氫氧化鉀的差異分類,在加工設備和加工要求方面都有著很大的分別。
1. Pay attention to the requirements of processing purity. According to the different classification of potassium hydroxide in the market, there are great differences in processing equipment and processing requirements.
2、在加工的操縱過程中,先要做的即是要做好肯定的防護對策,平安制作很重要。
2. In the process of processing, the first thing to do is to do a good job of positive protection measures. Safe production is very important.
3、在加工制作時,要維持環境的整潔和密封性,阻止非專門職員靠近產物的加工地區,預防帶來危害。
3. In the process of processing and manufacturing, the environment shall be kept clean and sealed, and non professional staff shall be prevented from approaching the processing area of products to prevent harm.
4、加工的過程中要獨自功課,阻止在周圍安放有其它性能本質的產物,預防出現互相影響造成出現化學反應的狀況。
4. In the process of processing, it is necessary to work alone to prevent products with other properties from being placed around and prevent chemical reaction caused by mutual influence.
Note: operators need to pass certain training and have sufficient theoretical and practical knowledge before they can operate. They should strictly follow the operating procedures. For more related matters, please visit our website http://www.hkjzshop.com Consult and understand.